Why Is My Canon Mx922 Won’t Print Not Responding?

The issue can be resolved with a simple firmware update. It will put in place the proper drivers that may affect the printer. Canon is a respected Japanese company that is involved in the manufacture of scanners, printers along with medical imaging devices. Canon has affiliates around the globe and is known for making premium products. But, as with any electronic device, you will encounter issues from time to time. 

The causes for various Canon MX922 printing issues

  • Paper jam
  • Older drivers
  • Issues with the print head
  • Internet connection problems
  • Problems with the head of the cartridge

How can I fix it?

How do I download printing paper?

Depending on the way you load your paper, you might experience a paper jam. To prevent this from happening, make sure that you load your papers in a way that you flip them several times. This stops them from getting stuck and causing jams in the paper. It is also important to make sure you align the edges correctly and ensure that you don’t over-exceed the limit of paper recommended by the manufacturer.

When you load the paper, place them on their front side, making sure they line up with the marks. Additionally, make sure to load the printing paper with the print side facing to the left.

Before loading your papers, make sure there aren’t curly edges. Make sure you’re using the correct paper size that works with your printer. Make sure you clean the interior of your cassette often to eliminate any dirt particles. Also, before printing, make sure that the cover of the tray is shut completely.

It is essential to take good care of your cartridges. You shouldn’t rupture the seal on the cartridge unless you plan to use the cartridge right away. This will prevent the head of the cartridge from becoming blocked. Make sure you buy the correct cartridge for ink. There are a variety of third-party firms that sell ink cartridges, and occasionally they sell ink of inferior quality that could damage your printer. Buy from reputable dealers.

Printing results that aren’t satisfactory

This manifests itself in blurred lines, white streaks, and different shades. If this occurs it is likely that the settings of your media don’t correspond to the type of paper or the size. Incorrect paper-type settings could affect the quality of color for the photo print. Incorrect paper-type settings can cause the print surface to scratch. To fix this, adjust the settings for paper type.

If you notice blurry or uneven colors, ensure that you’ve selected the correct print quality option. You can improve it and observe if the print quality improves.

The printer not printing at the end of the job

It is possible to remove yourself from a compressing software that prints out your project. This could dramatically alter your final result. It is done by selecting the print options and then selecting Page set-up. Select Do not permit software applications to compress data from print After that, click OK.

Sometimes, the issue is due to printing very large sheets of paper. It is possible to adjust this by entering the page setup and clicking Prevent data loss from printing, then turning the tab until it is turned on. If this option is enabled, you might experience a decrease in print quality. Also, make sure you have enough storage space on your hard disk.

The printer is not responding

Although the Canon mx922 won’t print it can malfunction from time to time. Paper jams can be the most troubleshooting method for all printers. Make sure that prior to operating your printer that there is nothing blocking the tray. Examine the output and input tray for any small objects.

The cartridges you use for ink are designed to last for a certain time and then be necessitated for refilling. If your printer won’t print, the issue may be due to the absence of ink inside the cartridges. You should receive alerts for low levels of ink at the computer. If the inks are drained but you’re still not printing, it is possible to review the cartridge’s connections. The printer head is typically the cause of the issue because it could stop printing in the event of any kind of blockage.

Troubleshooting a printer MX922 that does not print wirelessly

In some cases, the reason why you can’t print wirelessly is due to the fact that your router is sending an insufficient signal. This could be the result of a variety of factors, such as the time that you use your router, it being peak season, or your printer’s computer’s connections not being in sync. This can be solved if you

  • Make sure you’ve switched on all of your devices, including printers or computer
  • If they’re on, you can turn them off in a single step.
  • This will restart some drivers, and you should be capable of printing quickly
  • It is also possible to move the printer to the access point.

How do you solve the common Canon MX922 issues?

They should be opened and take out any papers that have become stuck. Make sure you air-dry your paper before placing them into the tray. tray. Check for curly edges which can increase the risk of jams in the paper. Do not load more than one paper in the tray at one time. Outdated drivers Go to the Canon site and search for the latest drivers to your printer.No power. Try to connect your printer straight to the main power supply in the absence of power. Check your printer adapter for evidence of damage. Try connecting it to another power outlet. Not printing wirelessly. Check your LAN settings. Make sure that your router, hp printer is in an error state, as well as computer cable, are in order. Make sure your printer is running.


If your printer isn’t working from its bottom tray, you may try restarting it to see if the software for your printer can fix the issue on its own. If that doesn’t work, try updating the drivers for your printer. Also, examine the printer’s trays for indications of obstruction.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button