How To Choose a New Roof for Your House


Aesthetics are important when selecting a new roof for your new home or if you are going for a roof replacement, but so are the material’s cost, weight, and installation requirements. Whether you are starting from scratch or replacing an existing roof, various materials are readily available and worthy of consideration. Examples are asphalt, wood, composite shingles, slate, concrete, and clay tiles. Style is important, but it is not the only consideration. Here are some essential things you need to know before choosing a new roof for your house. 

Terminology for Roofing

Let’s start with terminology before we get into materials. Roofers rarely use the term “square feet.” Instead, they communicate in squares. A square is their basic unit of measurement; one square equals 100 square feet or a 10-foot by 10-foot square. A typical two-storey, 2,000-square-foot gable roof will have less than 1,500 square feet of the roofing area or about fifteen squares.

Cost of a New Roof 

Many factors will influence the cost of a new roof. The material’s price is the starting point, but other factors must also be considered. If you are remodelling a house, one consideration is the condition of the existing roof—if old materials must be removed and the supporting structure must be repaired, this will all cost money. Another contributing factor is the roof’s shape. A gable roof with few or no breaks in its planes, such as chimneys, vent pipes, or dormers, is an easy roof to install. A house with multiple chimneys, intersecting rooflines called valleys, turrets, skylights, or other features will cost significantly more to the roof.

Choosing Roof Materials

Roofing materials do not suit every roof. A flat roof or a low slope may necessitate a different surface than one with a steeper pitch. Because slate and tile are heavy materials, the structure of many homes is inadequate to support the load. Consider the different options before consulting with your designer and obtaining job estimates. If you are thinking of remodelling, the existing roof of your house will most likely influence your choice of roofing material. If you are considering other options, you should think about the price and the colour, texture, weight, and durability of your alternatives, as well as what has traditionally been used on houses like yours.

Installing Guidelines

Whatever roofing surface you choose, flashing will almost certainly be required. Flashing is an essential component of all exterior work, both on the roof and the siding. Metal flashing made from either aluminium, copper, occasionally lead, or plastic film is used. It is applied in strips to areas where dissimilar materials meet, such as where the masonry chimney meets the roofing shingles, where the siding meets the window frames, etc. The most likely place for leakage is where different materials meet, so good flashing work is essential to keeping a structure watertight. Whatever roof materials are used, the coursing should be visually consistent and parallel to the roof edges. The joints should be staggered from one course to the next.

We, at Above and Beyond, can assist you in choosing a new roof for your house. So what are you waiting for? Get advice from the best now!

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button