How do I troubleshoot an HP Printer Error?

Troubleshoot an HP Printer Error

HP is a well-known name synonymous with printers. There are many HP printing models. It is very easy to install them. HP Printer Error Code 79 may be encounter by some user when printing. When the printer is unable to communicate with its commanding device, will be display.

Why HP Printer Error 79

  1. HP printer connection error
  2. The printer doesn’t have a driver
  3. Some printer files won’t work
  4. The HP printer cannot connect to the correct network
  5. The printhead isn’t working.
  6. HP printers can’t retrieve ink

Troubleshooting HP Printer Error 79

Start the HP Printer

If the printer is having problems with runtime, users may receive an error code. Restart your device to fix the runtime problem. When the printer receives an update, it will display an error message. However, certain services may become stuck. Take the cable out and restart the power. After you have made the connection, all functions of your HP printer will be restored. Send a new print command to confirm the error.

Run the Printer Troubleshooter

It is recommend that you look into the troubleshooting software if your printer display error. The tool can assist you in fixing any error message that are cause by a printer file. Click on Update and Security to open your computer. Also visit printer repair service in Dubai. 

Select Troubleshooter and then choose Printer. After it starts, it will search for any printer-related files. Once you have fixed the printer-related files, you can see an information page. After your errors have been corrected, you can easily give the command to print your reports.

Connect the HP Printer

If the printer is not connected properly, it will display an error message. Verify that the cable is properly connected to the printer. Then connect the cable to your HP printer. Verify that the cable is not damaged. Connect the cable again and ensure that it is secure.

Verify the WPS pin of the router and wireless HP printer connectivity. To activate the printer’s Wi-Fi button, turn off the router and restart it. And find the name and IP address of the network, look at the screen on the printer. So establish the connection, select the network name. Once you’ve completed the printer configuration, print another job and check for errors.

Download the HP Printer Driver

If the driver is not installed, your device may display an HP Printer Error Code (0xc18a0206). Your HP printer will not be able to interpret the commands if the driver isn’t installed. The driver acts as a bridge between your printer and your computer. Choose the HP driver that best suits your printer.

Fix driver files that aren’t working. To repair the driver, the user can download the repair tool and use it. Installing the driver is the best method. You can find the corrupt driver setup and then delete it. You can then download the exact printer driver setup.

Check the Printhead and Fuser

If the fuser or printhead are not working, the printer might display error messages. You will need to be able to repair the fuser of your printer if it is damaged. Get a replacement fuser for the printer. Next, inspect the printer for any errors. You should also check for excessive heat if you find a problem with the printhead. Shut down the printer if the printer is heating up.

It may take some time for the printhead to cool down. Start the printer again and inspect the printhead. Clear the printhead if it is blocked. Run the printer head cleaning function.Any other issue related to printer visit printer repair dubai. This will remove all ink from the head. Once you are done cleaning, go to your computer and print another command.

Run a Malware Scan

If the printer is receiving invalid print jobs, HP printer will give error code 79. Malware in the system has corrupted the print command, so the printer can’t understand it. The user must remove all malicious code from his computer.

To get rid of the malware, open Defender on your computer. You can also choose your individual antivirus to run the scan. Once you have deleted any malware, open the file to issue a new print request. Once the printer accepts a job, it will immediately start printing.

Reset your HP Printer

After making changes to your printer settings, error code 79 is displayed. You should immediately reverse these changes. You should reset your settings if you have forgotten them. After the factory reset, connect the printer to the computer and set the password again. You can take prints after setting up the printer and then check for any errors.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button